Water Treatment Products
Self-Contained Ozone
Ozone
For RentFor Sale
Manufacturer
H2O Engineering Inc.
Description
H2O Engineering's TOrCsOx® technology has been Title 22 validated by Carollo Engineers in the State of California.
DetailsBecause of its high oxidation potential, ozone is a viable disinfectant for killing bacteria, and inactivating viruses and protozoa. In addition to destructing organic compounds, ozone can also break down harmful viruses and destroy many pharmaceuticals found in wastewater.
H2O Engineering's TOrCsOx® technology has been Title 22 validated by Carollo Engineers in the State of California.
Advantages of Ozone
- Powerful oxidant
- Environmentally friendly alternative to chlorine
- Precipitates iron, manganese, and hydrogen sulfide allowing these contaminants to be filterable
- Able to meet current and future regulatory standards as legislation becomes more stringent
Self Contained
Self-Contained Ozone Systems are available for a wide range of applications. Considering system size, site specific requirements and/or restrictions, as well as installation logistics and project objectives helps in determining the ideal equipment containment selections. H2O Engineering offers stationary systems such as cabinet, skid, and cargo container mounted in addition to trailer mounted systems for portability needs. This flexibility allows us to incorporate various system elements as needed, such as environmental controls, equipment noise mitigation, and equipment security.
Large Scale
Large generators, producing over 50 pounds per day of ozone, are suitable for use in applications such as community drinking water systems, publicly owned treatment works, and industrial waste or process water treatment. Typically, large scale systems are contained in dedicated buildings at the facility and final equipment construction is performed on site. However, many of these systems are available in prefabricated designs which are prepackaged for ease of transportation. A contained design also facilitates equipment installation by minimizing procedural and safety ramifications often related to performing construction at site, as well as reducing schedule collaboration and coordination.
Reverse Osmosis (RO)
E2 Series
For RentFor Sale
Models Available
E2-0375, E2-0750, E2-1125, E2-1690, E2-2535
Manufacturer
Suez (Formerly GE Water)
Description
The E2 Series offers 375 to 2535 Gallon per Day (GPD) Reverse Osmosis Units
DetailsRecovery Range: 33-50%
Permeate Rate Range gpm (m3/hr): 0.3 (0.07) to 1.8 (0.40)
Concentrate Rate gpm (m3/hr): 0.2 (0.04) to 1.8 (0.40)
When you mention reverse osmosis (RO), Suez (Formerly GE Water) is the first name to come to mind. Our E-series RO machines are designed for durable operation, high quality product water production, easy installation and straight-forward control.
Ranging in sizes from 375 GPD (0.26 GPM) to 2535 GPD (1.8 GPM), these Brackish RO machines designed to operate in the 200-220 psig range. The series has 2.5" vessels with a maximum recovery of 50%. Operating temperature range is 55-85 degrees Fahrenheit. Minimum inlet pressure is 30 psig.
Flow Specifications:
Recovery Range: 33-50%
Permeate Rate Range gpm (m3/hr): 0.3 (0.07) to 1.8 (0.40)
Concentrate Rate gpm (m3/hr): 0.2 (0.04) to 1.8 (0.40)
Pump and Motor:
Pump: Procon Series
Pump Type: Rotary Vane
Motor: 1-pase, ODP, 110 VAC
Membrane Elements:
Membrane Elements: Desal AG2521TM or AG2540TM (other options available)
Operating Parameters:
Operating Pressure: 200-220psig
Maximum Recovery: 50%
Nominal Rejection: 95-98%
Operating Temperature: 55-85°F
Minimum Inlet Pressure: 30 psig
Design Temperature: 77°F
Materials of Construction:
Frame: Painted Carbon Steel
Membrane Housing: Stainless Steel
Tubing: Polyethylene
Features Include:
Low inlet pressure switch
Conductivity meter
Stainless steel pump
Permeate and concentrate flow meters
E4 Series
For RentFor Sale
Models Available
E4-2200, E4-4400, E4-6600, E4-8800, E4-11000, E4-13200
Manufacturer
Suez (Formerly GE Water)
Description
The E4 Series offers 2200 to 13200 Gallons per Day (GPD) Reverse Osmosis Units
DetailsRecovery Range: 50-75%
Permeate Rate Range gpm (m3/hr): 1.5 (0.3) to 9 (2.1)
Concentrate Rate gpm (m3/hr): 0.5 (0.1) to 9 (2.1)
When you mention reverse osmosis (RO), Suez (Formerly GE Water) is the first name to come to mind. Our E-series RO machines are designed for durable operation, high quality product water production, easy installation and straight-forward control.
Ranging in sizes from 2200 GPD (1.5 GPM) to 13200 GPD (9 GPM), these Brackish RO machines designed to operate in the 200-220 psig range. The series has 4" vessels with a maximum recovery of 75%. Operating temperature range is 55-85 degrees Fahrenheit. Minimum inlet pressure is 30 psig.
Flow Specifications:
Recovery Range: 50-75%
Permeate Rate Range gpm (m3/hr): 1.5 (0.3) to 9 (2.1)
Concentrate Rate gpm (m3/hr):0.5 (0.1) to 9 (2.1)
Pump and Motor Specifications:
Pump: Tonkaflo
Pump Type: Multi-stage, centrifugal
Motor: 3-phase, TEFC, 208-230/460 VAC
Membrane Elements:
Element Model: Desal AG4040TM
Operating Parameters:
Operating Pressure: 220psig
Maximum Recovery: 75%
Nominal Rejection: 95-98%
Operating Temperature: 55-85°F
Minimum Inlet Pressure: 30 psig
Design Temperature: 77°F
Materials of Construction:
Frame: Painted Carbon Steel
Membrane Elements: AG4040TM
Membrane Housing: Stainless Steel
Inlet Plumbing: Schedule 80 PVC
High Pressure Plumbing: Reinforced rubber hose
Tubing: Polyethylene, NSF approved
Control Enclosure: NEMA 1
Motor Starters: NEMA 4X
Cartridge Filter: RO, Save, 1micron, 20-inch
Features Include:
Low inlet pressure switch
Autoflush system
Conductivity meter
Stainless steel pump
Permeate and concentrate flow meters
E4H Series
For RentFor Sale
Models Available
E4H-16K, E4H-21K, E4H-27K, E4H-38K, E4H-43K
Manufacturer
Suez (Formerly GE Water)
Description
The E4H Series offers 16000 to 43000 Gallon per Day (GPD) Reverse Osmosis Units
DetailsRecovery Range: 75%
Permeate Rate Range gpm (m3/hr): 11.2 to 30 (2.56 to 6.8)
Concentrate Rate gpm (m3/hr): 3.4 to 10 (0.9 to 2.3)
When you mention reverse osmosis (RO), Suez (Formerly GE Water) is the first name to come to mind. Our E-series RO machines are designed for durable operation, high quality product water production, easy installation and straight-forward control.
Ranging in sizes from 16000 GPD (11.2 GPM) to 43000 GPD (30 GPM), these Brackish RO machines designed to operate in the 200-220 psig range. The series has 4" vessels with a maximum recovery of 75%. Operating temperature range is 55-85 degrees Fahrenheit. Minimum inlet pressure is 30 psig.
Flow Specifications:
Recovery Range: 75%
Permeate Rate Range gpm (m3/hr): 11.2 to 30 (2.56 to 6.8)
Concentrate Rate gpm (m3/hr):3.4 to 10 (0.9 to 2.3)
Pump and Motor Specifications:
Pump: Tonkaflo
Pump Type: Multi-stage, centrifugal
Motor: 3-phase, TEFC, 230/460 VAC
Membrane Elements:
Element Model: Desal AK4040TM
Operating Parameters:
Operating Pressure: 220psig
Maximum Recovery: 75%
Nominal Rejection: 95-98%
Operating Temperature: 55-85°F
Minimum Inlet Pressure: 30 psig
Design Temperature: 77°F
Materials of Construction:
Frame: Painted Carbon Steel
Membrane Elements: AK4040TM
Membrane Housing: FRP
High Pressure Plumbing: Stainless Steel
Low Pressure Plumbing: Schedule 80 PVC
Motor Starters: NEMA 4
Features Include:
Low inlet pressure switch
Inlet pH sensor
Clean in Place (CIP) system
Conductivity meter
AccuTrak RO microprocessor controller
Permeate and concentrate flow meters
E4 Series Ultra
For RentFor Sale
Models Available
E4 Ultra 6
Manufacturer
Suez (Formerly GE Water)
Description
The E4 Ultra Series is a 7200 Gallon per Day (GPD) Reverse Osmosis Unit
DetailsRecovery Range: 25-45%
Permeate Rate Range gpm (m3/hr): 2 to 5 (.45 to 1.14)
Concentrate Rate gpm (m3/hr): 6.1 (1.39)
When you mention reverse osmosis (RO), Suez (Formerly GE Water) is the first name to come to mind. Our E-series RO machines are designed for durable operation, high quality product water production, easy installation and straight-forward control.
The E4 Ultra produces 7200 GPD (5 gpm), this High Brackish RO machine is designed to operate in the 200-1160 psig range. The series has 4" vessels with a maximum recovery of 45%. Operating temperature range is 55-85 degrees Fahrenheit. Minimum inlet pressure is 30 psig.
Flow Specifications:
Recovery Range: 25-45%
Permeate Rate Range gpm (m3/hr): 2 to 5 (.45 to 1.14)
Concentrate Rate gpm (m3/hr):6.1 (1.39)
Pump and Motor Specifications:
Pump: Danfoss
Pump Type: Positive Displacement
Motor: 3-phase, TEFC, 380VAC/50Hz 7.5HP
Membrane Elements:
Element Model: Desal AD4040FM
Operating Parameters:
Operating Pressure: 1160 psig
Maximum Recovery: 45%
Nominal Rejection: 99.6%
Operating Temperature: 55-85°F
Minimum Inlet Pressure: 30 psig
Design Temperature: 68°F
Materials of Construction:
Frame: Painted Carbon Steel
Membrane Elements: AD4040FM
Membrane Housing: FRP
Inlet Plumbing: Schedule 80 PVC
High Pressure Plumbing: Reinforced rubber hose
Tubing: Polyethylene, NSF approved
Control Enclosure: NEMA 1
Motor Starters: NEMA 4X
Cartridge Filter: RO, Save, 1micron, 20-inch
Features Include:
Low inlet pressure switch
Autoflush system
Conductivity meter
Stainless steel pump
Permeate and concentrate flow meters
E8 Series
For RentFor Sale
Models Available
E8-57K, E8-86K, E8-108K, E8-144K
Manufacturer
Suez (Formerly GE Water)
Description
The E8 Series offers 57000 to 144000 Gallon per Day (GPD) Reverse Osmosis Units
DetailsRecovery Range: 66-75%
Permeate Rate Range gpm (m3/hr): 40 to 100 (9 to 23)
Concentrate Rate gpm (m3/hr): 13 to 52 (3 to 12)
When you mention reverse osmosis (RO), Suez (Formerly GE Water) is the first name to come to mind. Our E-series RO machines are designed for durable operation, high quality product water production, easy installation and straight-forward control.
Ranging in sizes from 57000 GPD (40 GPM) to 144000 GPD (100 GPM), these Brackish RO machines designed to operate in the 200-250 psig range. The series has 8" vessels with a maximum recovery of 75%. Operating temperature range is 55-85 degrees Fahrenheit. Minimum inlet pressure is 30 psig.
Flow Specifications:
Recovery Range: 66-75%
Permeate Rate Range gpm (m3/hr): 40 to 100 (9 to 23)
Concentrate Rate gpm (m3/hr): 13 to 52 (3 to 12)
Pump and Motor Specifications:
Pump: Tonkaflo
Pump Type: Multi-stage, centrifugal
Motor: 3-phase, TEFC, 460 VAC
Membrane Elements:
Element Model: Desal AG8040F
Operating Parameters:
Operating Pressure: 200-250 psig
Maximum Recovery: 75%
Nominal Rejection: 95-98%
Operating Temperature: 55-85°F
Minimum Inlet Pressure: 30 psig
Design Temperature: 77°F
Materials of Construction:
Frame: Painted Carbon Steel
Membrane Elements: AG8040F
Membrane Housing: FRP
Low Pressure Plumbing: Schedule 80 PVC
High Pressure Plumbing: Stainless Steel
Motor Starters: NEMA 4
Features Include:
Inlet pH sensor
Autoflush system
Conductivity sensor
Chemical dosing pump for antiscalant dosing or pH adjustment
1 micron pre-filter and SS housing
Stainless steel pump
Permeate and concentrate flow meters
RO Membranes
For Sale
Models Available
AG, AG LF, AK, AP, AD, C, Duratherm* HWS and NSF-61
Manufacturer
Suez (Formerly GE Water), LanXess, Hydranautics, Trisep
Description
Consult with your H2O Engineering Water Treatment Technologist for the correct membrane given your influent water quality and application.
H2o Engineering has a broad range of pure water membranes that are used in water applications worldwide. The membranes are used to desalinate brackish water for applications ranging from drinking water to boiler feedwater applications to aquifer recharge to tertiary wastewater treatment.
H2O Engineering’s products cover the entire spectrum of desali-nation needs from seawater to brackish water, water softening and the full range of low energy, low fouling and low pressure products to meet our customers’ unique needs.
Membrane Characteristics and Product Name
- Brackish
- Low Fouling
- Low Energy
- Low Pressure
- Seawater
- Chlorine Resistant
- Hot Water Sanitization
- NSF-61 Certified
2000 to 4000 GPD RO System (120 V)
For RentFor Sale
Models Available
2000 GPD and 4000 GPD
Description
120 V RO System which can be wall or floor mounted.
DetailsRecovery Range: 50%
Permeate Rate Range GPD: 2000 to 4000
Permeate Rate Range gpm: 1.39 to 2.78
Designed to produce low dissolved solids water from high TDS tap or well water, these wall-mounted systems use high efficiency reverse osmosis membranes. The product water is used in applications such as spot free rinse, water stores, whole house, labs, ice makers, humidification, misting and a wide variety of other applications.
Key Features:
- Compact, Heavy Duty, Powder Coated Frame
- Proven components used throughout the system
- Conservatively engineered for reliable long term performance
- Factory tested to ensure trouble-free operation
Standard Equipment:
- Thin Film Composite Membranes
- FRP membrane pressure vessels
- 5 micron cartridge filter & housing
- Automatic inlet feed solenoid valve
- System control valve, Stainless Steel
- Recycle control valve, Stainless Steel
- Low pressure pump protection
- Rotary vane high pressure Stainless Steel RO pump
- Liquid filled system pressure gauge
- Powder coated carbon steel frame
- Boxed and palletized for shipment
Controller Features
- Panel mounted on/off switch
Monitors and/or Controls
- Inlet valve
- Low pressure switch
- Low pressure auto restart after 1 hour
- Feed water flush at system shut-down
- On/Off with tank level
- Pre-treatment backwash/lockout
- System On/Off according to Tank Level (Float purchase separately)
Indicator Lights
- Service run/system flush
- Storage tank full/pretreatment lockout
- Low pressure shutdown/auto restart
Notes and Voltage/ Ordering Information:
- All dimensions and weights are approximate.
- Capacity Basis: 24 hrs/day
- Systems rated at: 77°F (25°C) using 5000 ppm sodium chloride solution operating at approx. 200-250 psi pressure.
- Minimum feed pressure to RO System: 40-60 PSI. System capacity changes significantly with water temperature
- Chlorine must be removed with a carbon filter prior to the RO system, if present in the feed water.
- Pretreatment for water hardness using a softener or antiscalant injection should be added to avoid scaling the membranes.
- Feed water turbidity: Less than 1 NTU; Feed water silt density index (SDI): 3 maximum. If exceeded, pretreatment with media filter recommended. All pretreatment equipment and SDI test kits are available.
- Voltage Codes: Above models indicate recommended voltage codes per model.
- Available voltages:
- 116 = 120V/1ph/60hz
- 215 = 220V/1ph/50hz
- 216 = 220 or 230V/ 1ph/ 60hz
- Three phase not available.
PRO and PRO Flex Series
For RentFor Sale
Models Available
PRO Flex, PRO-50, PRO-100, PRO-150, PRO-200, PRO-300, PRO-450
Manufacturer
Suez (Formerly GE Water)
Description
The PRO Flex ans PRO Series offers 72000 to 648000 Gallon per Day (GPD) Reverse Osmosis Units
DetailsRecovery Range: 65-85%
Permeate Rate Range gpm (m3/hr): 50 to 450 (11.4 to 102.2)
Concentrate Rate gpm (m3/hr): 17 to 150 (3.8 to 34)
When you mention reverse osmosis (RO), Suez (Formerly GE Water) is the first name to come to mind. Our E-series RO machines are designed for durable operation, high quality product water production, easy installation and straight-forward control.
Ranging in sizes from 72000 GPD (50 GPM) to 648000 GPD (450 GPM), these Brackish RO machines designed to operate in the 240-290 psig range. The series has 8" vessels with a maximum recovery of 85%. Operating temperature range is 55-85 degrees Fahrenheit. Minimum inlet pressure is 30 psig.
Flow Specifications:
Recovery Range: 65-85%
Permeate Rate Range gpm (m3/hr): 50 to 450 (11.4 to 102.2)
Concentrate Rate gpm (m3/hr): 17 to 150 (3.8 to 34)
Pump and Motor Specifications:
Pump: Tonkaflo
Pump Type: Multi-stage, centrifugal
Motor: 3-phase, TEFC, 230/460 VAC
Membrane Elements:
Element Model: OSMO PRO 365
Operating Parameters:
Operating Pressure: 240 to 290 psig
Maximum Recovery: 65-85%
Nominal Rejection: 97-99%
Operating Temperature: 55-85°F
Minimum Inlet Pressure: 30 psig
Design Temperature: 60°F
Materials of Construction
Frame: Painted Carbon Steel
Membrane Elements: OSMO PRO 365
Membrane Housing: FRP or Stainless Steel
Low Pressure Plumbing: Schedule 80 PVC
High Pressure Plumbing: Stainless Steel
Control Enclosure: NEMA 12
Cartridge Filter: RO, Save, 1 micron
Features Include:
Allen-Bradley PanelView
UL 508 Listed
RO permeate flush on shutdown
Primary and final pressure transmitters
4-20mA instruments on PanelView
Desalitech ReFlex High Recovery RO (up to 98%)
For RentFor Sale
Models Available
R2, R3, R5, R8, R10, R15, R20, R30 and R36
Manufacturer
Desalitech
Description
Desalitech offers 72000 to 1,295,000 Gallon per Day (GPD) Reverse Osmosis Units
DetailsRecovery Range: 75-98%
Permeate Rate Range gpm (m3/hr): 50 to 900 (11 to 255)
Desalitech ReFlex™ Reverse Osmosis systems are highly efficient water purification systems backed by Desalitech’s maximum recovery guarantee.
Featuring Desalitech’s patented Closed Circuit Desalination (CCD™) technology, ReFlex RO products are ideal for extracting purified water from industrial, brackish and wastewater sources. They use only standard off-the-shelf RO membranes and components, configured in a smart new way that gives the operator direct control of recovery rate, cross flow and flux.
Ranging in sizes from 72000 GPD (50 GPM) to 1,295,000 GPD (900 GPM), these high recovery RO units designed to operate in the 200-220 psig range. The series has 8" vessels with a maximum recovery of 98%. Operating temperature range is 36-113 degrees Fahrenheit. Minimum inlet pressure is 10 psig.
Flow Specifications:
Recovery Range: 75-98%
Permeate Rate Range gpm (m3/hr): 50 to 900 (11 to 255)
Motor:
Type: TEFC
Power: 20hp to 300hp
Operating Parameters:
Max Pressure: 450psig
Recovery: 75 - 98%
Nominal Rejection: 95-99.5%
Operating Temperature: 36-113°F
Inlet Pressure: 10 - 60 psig
Design Temperature: 77°F
Materials of Construction:
High-pressure piping: 316SS Sch.40
Low-pressure piping: PVC Sch.80
Frame: Epoxy Painted carbon steel
Clamps/races: Galvanized steel
Membranes elements: TFC
Features Include:
Chemical dosing systems
NSF-certified components
Clean-in-Place (CIP) and flushing systems
Programmable logic controller with remote monitoring and control functionality
Premium brackish water reverse osmosis membranes
Automatic response to feed variations
High recovery, low fouling/scaling and low energy consumption performance
Maximum recovery guaranteed
Desalitech ReFlex Max High Recovery RO (up to 98%)
For RentFor Sale
Models Available
ReFlex Max
Manufacturer
Desalitech
Description
ReFlex Max systems are ideal for brine concentration and seawater desalination.
DetailsAdjustable recovery – 35 to 98%.
Desalitech ReFlex™ Max Reverse Osmosis systems are highly efficient water purification systems ideal for brine concentration and seawater desalination. ReFlex Max RO is backed by Desalitech’s maximum recovery guarantee.
Featuring Desalitech’s patented Closed Circuit Reverse Osmosis (CCRO™) technology, ReFlex Max RO products extract purified water from industrial, brackish, seawater and wastewater sources. They use only standard off-the-shelf RO membranes and components configured in a smart new way that gives the operator direct control of recovery rate, cross flow and flux.
Flexible operation and resistance to scaling and fouling greatly improve the reliability of ReFlex Max RO systems. Operators can easily and automatically cope with variations in feed water and operational requirements, optimize process performance and minimize costs on a day-to-day basis. In the future, this flexibility can be used to maximize the performance of improved membranes or water pretreatments. By choosing a ReFlex solution now, countless future concerns and compromises can be avoided.
Standard Features
• Maximum Recovery - Guaranteed.
• Patented high recovery, low fouling/scaling,low energy consumption performance.
• Adjustable recovery – up to 98%.
• Automatic response to feed variations.
• Premium seawater RO membranes.
• Programmable logic controller with remotemonitoring and control functionality.
• Chemical dosing systems.
• NSF-certified components.
Optional Features
• Ultra-filtration or multi-media filtration.
• Mixed-bed permeate polishing.
• Transfer pumps, storage tanks.
• Clean-in-Place (CIP) and flushing systems.
Operating Parameters
• Adjustable Recovery: 40-98%
• Rejection: 95.0-99.5%
• Adjustable Flux: 6-25 gfd (10-42 lmh)
• Feed TDS: 5,000 - 70,000 mg/L
• Temperature: 36-113F (2-45C)
• Max Pressure: 1,200 psi (83 bar)
• Inlet Pressure: 10-60 psi (0.8-4.0 bar)
Materials of Construction
• High-Pressure Piping - SS / Duplex / SD
• Low-Pressure Piping - PVC Sch.80
• Frame - Epoxy Painted Carbon Steel
• Enclosure - Nema 4
• Clamps/Races - Galvanized steel
• Membrane Elements - TFC
Membrane Options
• 440 ft2 (std), 400 ft2 or 380 ft2
• 28 mil feed spacer (std) or 34 mil
• Low energy or high rejection
• Housings FRP, SS / Duplex / SD ports
GRUNDFOS Chemical Dosing Pumps
For Sale
Models Available
DDA/DDC/DDE
Manufacturer
GRUNDFOS
Description
The SMART Digital DDA, DDC and DDE models with powerful variable-speed stepper motors bring state-of-the art technology to perfection.
DetailsThe included click-stop mounting plate is an example of the unique flexibility offered, with only a few variants. Easy handling and perfect overview and control ensure simple installation, commissioning and operation. The pump monitors the dosing process of liquids when the FlowControl function is activated, for advanced process reliability with accuracy of 1% of setpoint
DDA Models
• High-end solution for complex and demanding applications
• Flow and pressure up to 8 gph and up to 232 psi
• Auto-deaeration during pump standby
• Flexible Fieldbus control
• Turn-down ratio 3000:1 with constant 100% stroke length
DDC Models
• Optimal price-performance ratio
• Flow and pressure up to 4 gph and up to 145 psi
• Two SlowMode functions (25% and 50%), calibration mode,
service display
• External stop, dual-level tank control, 2 relay outputs
DDE Models
• Digital Dosing™ even for the low budget segment
• Flow and pressure from 0.0015 to 4 gph and up to 145 psi; two
models cover entire range
• Control options: manual control 0.1-100 %, pulse in % of stroke
volume
• External stop, empty tank control
Process Skids
Heat Exchanger Skid for High Purity Water
For RentFor Sale
Description
The skid is designed to heat, filter, and sanitize reverse osmosis water for process supply. The heat from another waste process is first used in a countercurrent plate and frame heat exchanger to recover energy and lower overall heat demand, maximizing plant efficiency and resources. The RO product water from the first heat exchanger is then sent to redundant VFD controlled pumps and passes through a UV sterilizer, redundant cartridge filter housings, and another countercurrent plate and frame heat exchanger prior to distribution. H2O Engineering’s design included additional plate capacity to maintain process specifications for planned expansion. Temperature monitoring is provided pre and post heat exchanger on both the process water and plant hot water lines.
- UV System
- UV Disinfection System, 185/254nm Lamps with Light Trap Kit
- Controller, NEMA 4X Enclosure, LED Display
- Filtration
- (N+1) configuration available
- 316 SS Housing
- Accepts standard 40” filter elements
- 45-100 µm filter pore sizes available
- Heat Exchangers
- 500kW to 2000kW Heat transfer capacity
- Configurable plates to allow for expansion
- Instrumentation
- Conductivity transmitters
- Temperature transmitters
- Pressure transducers
- Paddlewheel flow sensors
- Level switches
- Pumps
- VFD Controlled
- (N+1) configuration
- Plumbing
- Sch80 PVC & CPVC
- Stainless Steel
- High temperature pipe insulation
- PLC
- Multiparameter monitoring
- Alarming
- Pump management
- Tank level control
High Purity DI Water Skids
For RentFor Sale
Description
The skid is used to polish reverse osmosis water with mixed bed resin to produce high purity DI water for process distribution. The skid contains redundant VFD controlled pumps and passes water through parallel sets of DI bottles, a UV sterilizer, and redundant cartridge filter housings prior to distribution. Differential pressure monitoring is included on the skid to alert user when maintenance is required. Temperature, flow, and conductivity monitoring are provided on the outlet of the skid.
- UV System
- UV Disinfection System, 185/254nm Lamps with Light Trap Kit
- Controller, NEMA 4X Enclosure, LED Display
- Filtration
- (N+1) configuration available
- 316 SS Housing
- Accepts standard 40” filter elements
- 45-100 µm filter pore sizes available
- Instrumentation
- Conductivity transmitter
- Temperature transmitter
- Pressure transducers
- Paddlewheel flow sensors
- Level switches
- Pumps
- VFD Controlled
- (N+1) configuration
- Schedule 80 PVC Plumbing
- Storage Tank
- Cone bottom
- High Density Polyethylene
- Nitrogen Blanketing System
- Mixed Bed DI
- Space reserved for 3.6 cu. ft. bottles
- Designed for easy service and exchange
Cooling Water Skid
For RentFor Sale
Description
The skid is designed for transferring, filtering, and cooling of process reverse osmosis water. Fluid enters the skid and runs through redundant VFD controlled pumps. The liquid is sent through a filter chamber and heat exchanger prior to distribution. The control panel includes PLC monitoring with flow, temperature, and pressure indicating transmitters. Alarming and all skid control is performed by the PLC and HMI located on the skid.
- Filtration
- 316 SS Bag Filter Housing
- Bag Filters
- 45-100 Micron available
- Heat Exchanger
- Plate Heat Exchanger
- Suction Diffuser
- Cast Iron Body, SS Orifice
- Pumps
- (N+1) pump configuration
- Horizontal end suction centrifugal
- Material: 316SS
- Control Panel
- PLC
- Basic HMI
- NEMA 12 Wall Mount Enclosure
- UL Listed
- VFD Panel
- 480VAC
- NEMA 12 Wall Mount Enclosure
- Instrumentation
- Temperature transmitters
- Pressure transducers
- Paddlewheel flow sensor
- Plumbing
- SS304
- All chilled water piping carbon steel
- High temperature pipe insulation
Tank Level Control Skid
For RentFor Sale
Description
The skid is a distribution skid for process waste water with elevated temperature. The heat from the fluid is recovered in a downstream heat exchanger to help with preheating another process’s makeup water. Material selection and insulation are designed to minimize heat loss. The wastewater is initially collected in a tank and the level is actively controlled by throttling redundant VFD controlled pumps which boost the water to the downstream heat recovery process. Tank filling is controlled by the customer and the pumps are controlled by VFD’s which monitor outlet pressure as monitored by the PLC on the skid. Alarming and all skid control is performed by the PLC and HMI located on the skid.
- Control Panel
- PLC with 10” HMI
- NEMA 12 Wall Mount Enclosure
- UL Listed
- VFD Panel
- 480VAC
- NEMA 12 Wall Mount Enclosure
- Instrumentation
- Pressure Switch
- Paddlewheel flow sensor
- Pumps
- VFD Controlled
- (N+1) pump configuration
- Vertical inline multistage
- Material: 316SS
- CPVC Plumbing
- Schedule 80 PVC
- High temperature pipe Insulation
- Storage Tank
- Level switches
- Level transducer
- Conservation vent
Industrial & Commercial Water Filtration Systems
High Flow Filters and Housings
For Sale
Models Available
Micron Rating: 0.5, 2, 5, 10, 20, 40, 70 and 135 Micron
Manufacturer
Rosedale, Suez (Formerly GE Water), 3M
Description
High flow filters and housings provide an operator friendly solution for dependable particulate removal at high flow rates (up to 400 GPM per filter). The horizontal mounting configuration makes filter change-outs easy on the user.
RO Membranes
For Sale
Models Available
AG, AG LF, AK, AP, AD, C, Duratherm* HWS and NSF-61
Manufacturer
Suez (Formerly GE Water), LanXess, Hydranautics, Trisep
Description
Consult with your H2O Engineering Water Treatment Technologist for the correct membrane given your influent water quality and application.
H2o Engineering has a broad range of pure water membranes that are used in water applications worldwide. The membranes are used to desalinate brackish water for applications ranging from drinking water to boiler feedwater applications to aquifer recharge to tertiary wastewater treatment.
H2O Engineering’s products cover the entire spectrum of desali-nation needs from seawater to brackish water, water softening and the full range of low energy, low fouling and low pressure products to meet our customers’ unique needs.
Membrane Characteristics and Product Name
- Brackish
- Low Fouling
- Low Energy
- Low Pressure
- Seawater
- Chlorine Resistant
- Hot Water Sanitization
- NSF-61 Certified
Bag Filters and Housings
For Sale
Models Available
Felt and Mesh Bag Filters
Manufacturer
Strainrite
Description
Micron Ratings: 0.5, 1, 5, 10, 25, 50, 75, 100, 150, 200
DetailsBag filters are a simple, cost effective filtration step for water sources with high solids loading. These filters are user friendly and easy to change out. Due to the high solids loading capability of a bag filter, end users see reduced consumable costs and labor costs associated with filter change outs.
Cartridge Filters and Housings
For Sale
Models Available
10", 20", 30" and 40" cartridge filters in pleated, depth and melt blown
Manufacturer
Suez (Formerly GE Water) / Pentair / Graver / 3M / Strainrite / Rosedale
Description
H2O Engineering partners with strategic leaders in the water filtration industry to supply the highest efficiency, lowest operating cost, smallest footprint and the most ideal product for your application.
Activated Carbon Filters
For Sale
Models Available
C10, C14, C21, C30, C36 and Custom
Manufacturer
Suez (Formerly GE Water) / Pentair
Description
Ideal for commercial and light industrial applications, E-series pretreatment is designed for durable operation, easy installation and straightforward control. The units are also the perfect compliment to the E-Series line of reverse osmosis systems.
General Features
- Single tank and duplex systems provide flexible flow options
- NSF 44 certified fiberglass reinforced plastic (FRP) tanks (150 psig design pressure, non-code)
- 12x40 mesh bituminous activated carbon
- Performa or Magnum multi-port valves with integrated flow meter
- Programmable GE Logix 764 controller for backwash sequence control
- Communication switch for downstream equipment included to prevent operation during backwash on single tank systems
- Interlock provided on duplex systems to maintain continuous flow during backwash
- No system bypass during backwash on Magnum systems
- Manual or time-initiated automatic backwash
- 120 VAC 60 Hz or 230 VAC 50 Hz models available
Multimedia Filters
For Sale
Models Available
M10, M14, M21, M30, M36 and Custom
Manufacturer
Suez (Formerly GE Water) / Pentair
Description
H2O Engineering partners with strategic leaders in the filtration industry to supply the highest efficiency, lowest operating cost, smallest footprint and the most ideal product for your application.
General Features
- Single tank and duplex systems provide flexible flow options
- NSF 44 certified fiberglass reinforced plastic (FRP) tanks (150 psig design pressure, non-code)
- GE Autotrol multi-port valves (Performa or Magnum Cv) with integrated flow meter for tank size 30-inches and smaller
- Programmable GE Logix 764 controller for backwash sequence control
- GE 962 stager control with butterfly valve nest on 36-inch vessels
- Communication switch for downstream equipment included to prevent operation during backwash
- Interlock provided on duplex systems to maintain continuous flow during backwash
- Manual or time-initiated automatic backwash
- No system bypass during backwash on Magnum systems
- 120 VAC 60 Hz or 230 VAC 50 Hz models available
Water Softeners
For Sale
Models Available
S10, S14, S21, S30, S36 and Custom
Manufacturer
Suez (Formerly GE Water) / Pentair
Description
H2O Engineering partners with strategic leaders in the water softening industry to supply the highest efficiency, lowest operating cost, smallest footprint and the most ideal product for your application.
General Features
- Single tank and duplex systems provide flexible flow options
- NSF 44 certified fiberglass reinforced plastic (FRP) tanks (150 psig design pressure, non-code)
- GE Autotrol multi-port valves (Performa or Magnum Cv) with integrated flow meter for tank size 30-inches and smaller
- Programmable GE Logix 764 controller for backwash sequence control
- GE 962 stager control with butterfly valve nest on 36-inch vessels
- Communication switch for downstream equipment included to prevent operation during backwash
- Interlock provided on duplex systems to maintain continuous flow during backwash
- Manual or time-initiated automatic backwash
- No system bypass during backwash on Magnum systems
- 120 VAC 60 Hz or 230 VAC 50 Hz models available
Greensand Filters
For Sale
Models Available
Various models available.
Manufacturer
Suez (Formerly GE Water) / Pentair
Description
H2O Engineering partners with strategic leaders in the filtration industry to supply the highest efficiency, lowest operating cost, smallest footprint and the most ideal product for your application.
Chemical (Antiscalant, SBS, pH Adjustment and CIP)
Clean-in-Place (CIP)
For Sale
Models Available
CIP Chemicals and CIP Service
Manufacturer
Suez (Formerly GE Water) / Minncare / Chemtreat
Description
A reverse osmosis unit's reliability is an important consideration for anyone dependent on its smooth operation. Routine membrane cleaning and system maintenance is essential for dependable operation.
Good maintenance practices improve reliability and reduce operating costs. Treatment chemicals can be an important part of a comprehensive maintenance program. Preventative maintenance can be enhanced through the targeted use of chemicals to minimize fouling, deposition and precipitated scales. When circumstances call for remedial action to restore performance, specialized chemicals can bring a system back to acceptable operation at a reasonable use cost. These materials can be applied on-site by the user, or the process can be performed off-site with several additional benefits.
Introduction
When a new set of reverse osmosis elements is installed, performance begins to decline immediately. Membrane manufacturers tell us that normalized flux declines by roughly 10% in the first 30 days of operation. This is truly a best case scenario, as it takes into account only the properties of the reverse osmosis membrane itself and does not take into account the many physical, chemical and biological processes that may combine to further reduce membrane performance.
Feedwater quality is a major determinant in the rate of performance decline a membrane system experiences. Suspended materials present in the water source foul elements beginning with the first stage. This can result in increased pressure differential and reduced flux. Dissolved minerals are concentrated as the feed passes through the brine-side of the membranes. As the mineral concentrations increase beyond saturation, salts precipitate. These salts tend to form in the tail elements first. The result is reduced flux and increased pressure drops in the final array. Bacteria can grow in any water, but they grow best in warm waters, and their optimal growth range overlaps with the typical feedwater temperature of reverse osmosis systems. Also, bacterial slimes can form in any part of the system. In practical experience, no one type of fouling occurs in isolation. In fact, each can influence the others, and it is common to have more than one problem foulant.
Recommendations for Clean-in-Place
Successful CIP requires planning and proper control of key system parameters. The most important parameters for cleaning are the cleaning chemistry, solution temperature, flow rate per vessel, pressure drop and use of soak times. Frequently, the effects of temperature, flow and soak times are ignored. Bear in mind that most reverse osmosis systems experience mixed deposits, so a single cleaning may not be effective.
H2O Engineering has a dedicated and experienced Service and O&M Team. Schedule your routine maintenance today!
Off-Site Membrane Cleaning
For RentFor Sale
Models Available
4" and 8" Membrane Cleaning, Loaner Membranes Available
Manufacturer
H2O Engineering Inc
Description
Off-site membrane cleaning is an effective solution for clients who do not have CIP systems onsite or for clients seeking to minimize onsite cleaning services.
DetailsPre and post cleaning performance data is provided to clients allowing end users to evaluate the performance of the cleaning process at the membrane level. After the cleaning, membranes are preserved and sent back to your plant in suitable packaging. During the cleaning process, loaner membranes are available to keep your system online and operational.
Antiscalant
For Sale
Models Available
Hypersperse MDC and MSI Antiscalants
Manufacturer
Suez (Formerly GE Water) / Chemtreat / Avista
Description
Our pretreatment program is designed to significantly reduce scale formation and fouling in membrane systems.
DetailsHypersperse MDC series offers protection against scale and colloidal foulants, while the Hypersperse MSI series offers additional control of silica scale.
The use of our chemistries improves efficacy against a broad range of scale-forming substances and keeps fouling material in suspension. Common foulants and scalants include calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, calcium fluoride, iron, colloidal material, silica and other organic contaminants.
Benefits and Features
- Effectively control scales including silica, calcium carbonate, calcium sulfate, barium sulfate, and strontium sulfate
- Compatible with the leading reverse osmosis (RO) and nanofiltration (NF) membranes
- Maintain cleaner membrane surfaces by dispersing particulate foulants
- RO systems can be run at higher recovery rates, which translates to lower operating costs
- Products available with multiple global regulatory approvals
- Non-P products available
- Effective over a wide pH range
- May be fed neat or diluted
- Coagulant compatible products available that can be used with SoliSep* MPT series products
Available Products
MDC120, MDC150, MDC151, MDC170, MDC220, MDC700, MDC704, MDC706, MDC708, MDC711, MDC714, MDC772, MDC775, MDC776, MSI310, MSI410
Description and Use
Hypersperse antiscalants are highly effective liquid products developed to control scale precipitates and reduce particulate fouling within membrane separation systems.
Excellent results are achieved in membrane separation processes including reverse osmosis, nanofiltration and electrodialysis reversal (EDR).
Dosing
Typical dosage range is between 0.5 and 4 mg/L. To determine the adequate dose rate for a certain system it is recommended to use the Argo Analyzer* simulation software. It will provide the appropriate application dosage based on the specific water chemistry and system design.
Argo Analyzer is a tool designed to provide guidance on the best choice of antiscalant treatment for RO systems. This software is very accurate in recommending the best Hypersperse product, the correct dosage and further guidelines for reverse osmosis systems. It also gives information about cleaner selection and cleaning procedures. .
Sodium Bisulfite
For Sale
Models Available
SBS
Manufacturer
Suez (Formerly GE Water)
Description
Sodium Bisulfite is a very cost-effective product used to remove free and combined chlorine from reverse osmosis and ultrafiltration feed waters.
Feed waters to membrane systems often contain chlorine to treat and prevent microbiological growth prior to the membrane separation process. This chlorine, however, can irreversibly damage thin film composite membranes by oxidizing the membrane surface. The sodium bisulfite quickly deactivates chlorine and protects membranes from damage.
Chemistry of Dechlorination
Deactivation of chlorine by sodium bisulfite:
NaHSO3 + HOCl → NaHSO4 + HCl
Sodium Bisulfite + Hypochlorous Acid → Sodium Bisulfate + Hydrochloric Acid
GRUNDFOS Chemical Dosing Pumps
For Sale
Models Available
DDA/DDC/DDE
Manufacturer
GRUNDFOS
Description
The SMART Digital DDA, DDC and DDE models with powerful variable-speed stepper motors bring state-of-the art technology to perfection.
DetailsThe included click-stop mounting plate is an example of the unique flexibility offered, with only a few variants. Easy handling and perfect overview and control ensure simple installation, commissioning and operation. The pump monitors the dosing process of liquids when the FlowControl function is activated, for advanced process reliability with accuracy of 1% of setpoint
DDA Models
• High-end solution for complex and demanding applications
• Flow and pressure up to 8 gph and up to 232 psi
• Auto-deaeration during pump standby
• Flexible Fieldbus control
• Turn-down ratio 3000:1 with constant 100% stroke length
DDC Models
• Optimal price-performance ratio
• Flow and pressure up to 4 gph and up to 145 psi
• Two SlowMode functions (25% and 50%), calibration mode,
service display
• External stop, dual-level tank control, 2 relay outputs
DDE Models
• Digital Dosing™ even for the low budget segment
• Flow and pressure from 0.0015 to 4 gph and up to 145 psi; two
models cover entire range
• Control options: manual control 0.1-100 %, pulse in % of stroke
volume
• External stop, empty tank control
ProMinent Metering Pumps
For Sale
Models Available
Various model available.
Manufacturer
ProMinent
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate pump selection.
Service, Operations and Maintenance
Clean-in-Place (CIP)
For Sale
Models Available
CIP Chemicals and CIP Service
Manufacturer
Suez (Formerly GE Water) / Minncare / Chemtreat
Description
A reverse osmosis unit's reliability is an important consideration for anyone dependent on its smooth operation. Routine membrane cleaning and system maintenance is essential for dependable operation.
Good maintenance practices improve reliability and reduce operating costs. Treatment chemicals can be an important part of a comprehensive maintenance program. Preventative maintenance can be enhanced through the targeted use of chemicals to minimize fouling, deposition and precipitated scales. When circumstances call for remedial action to restore performance, specialized chemicals can bring a system back to acceptable operation at a reasonable use cost. These materials can be applied on-site by the user, or the process can be performed off-site with several additional benefits.
Introduction
When a new set of reverse osmosis elements is installed, performance begins to decline immediately. Membrane manufacturers tell us that normalized flux declines by roughly 10% in the first 30 days of operation. This is truly a best case scenario, as it takes into account only the properties of the reverse osmosis membrane itself and does not take into account the many physical, chemical and biological processes that may combine to further reduce membrane performance.
Feedwater quality is a major determinant in the rate of performance decline a membrane system experiences. Suspended materials present in the water source foul elements beginning with the first stage. This can result in increased pressure differential and reduced flux. Dissolved minerals are concentrated as the feed passes through the brine-side of the membranes. As the mineral concentrations increase beyond saturation, salts precipitate. These salts tend to form in the tail elements first. The result is reduced flux and increased pressure drops in the final array. Bacteria can grow in any water, but they grow best in warm waters, and their optimal growth range overlaps with the typical feedwater temperature of reverse osmosis systems. Also, bacterial slimes can form in any part of the system. In practical experience, no one type of fouling occurs in isolation. In fact, each can influence the others, and it is common to have more than one problem foulant.
Recommendations for Clean-in-Place
Successful CIP requires planning and proper control of key system parameters. The most important parameters for cleaning are the cleaning chemistry, solution temperature, flow rate per vessel, pressure drop and use of soak times. Frequently, the effects of temperature, flow and soak times are ignored. Bear in mind that most reverse osmosis systems experience mixed deposits, so a single cleaning may not be effective.
H2O Engineering has a dedicated and experienced Service and O&M Team. Schedule your routine maintenance today!
Off-Site Membrane Cleaning
For RentFor Sale
Models Available
4" and 8" Membrane Cleaning, Loaner Membranes Available
Manufacturer
H2O Engineering Inc
Description
Off-site membrane cleaning is an effective solution for clients who do not have CIP systems onsite or for clients seeking to minimize onsite cleaning services.
DetailsPre and post cleaning performance data is provided to clients allowing end users to evaluate the performance of the cleaning process at the membrane level. After the cleaning, membranes are preserved and sent back to your plant in suitable packaging. During the cleaning process, loaner membranes are available to keep your system online and operational.
Installation, Service and O&M
Description
H2O Engineering, Inc. does not only pride itself on the equipment that it manufactures, but equally on the services that we provide in support of our products and our clients’ objectives. From assisting in preliminary development of project strategies and custom design concepts, to equipment O&M and data collection, and all the way through to project completion, we provide invaluable resources that promote goal achievement.
H2O Engineering understands that even with our standard products, the equipment sale itself is merely the beginning of our project relationship with clients. We nurture our client associations in an effort to gain an ongoing mutual trust, which facilitates efficient communication, promotes design innovation, and ensures site performance.
In addition to our commitment to our clients, H2O Engineering is also dedicated to Health and Safety. Our Service and Sales technicians are all extensively trained in CPR/First Aid and 40hr HAZWOPER. These efforts enable us to provide industry leading, hands on support, regardless of varying site environments. It also qualifies our technicians to adhere to specific, often stringent, site requirements. H2O Engineering, Inc. is a California licensed General Contractor # 790167 and has license Electrical Professional Engineers on staff.
DI, Exchange Services, and EDI
DI and Carbon Exchange Services - 0.5 GPM to 15 GPM
For Rent
Models Available
0.25 cu ft, 0.45 cu ft, 1.20 cu ft, 2.00 cu ft, 3.6 cu ft
Manufacturer
Suez (Formerly GE Water)
Description
We use the finest semiconductor grade resins. These resins are regenerated at high quality regeneration facilities located throughout the United States. The tanks are available with Cation, Anion and Mixed Bed resins and also Activated Carbon.
DI and Carbon Exchange Services – 25 GPM to 250 GPM
For Rent
Models Available
TurboFlo
Manufacturer
Suez (Formerly GE Water)
Description
We use the finest semiconductor grade resins. These resins are regenerated at high quality regeneration facilities located throughout the United States. The tanks are available with Cation, Anion and Mixed Bed resins and also Activated Carbon.
Benefits
- Reduce regenerate delivery and storage
- Eliminate on-site regenerations
- Ideal for zero-discharge
- Improve safety records reducing chemicals
- Engineered for UPW
- Provides high quality and low TOC throws
- Consolidation of vessels
- Quick exchanges
Typical Applications
- Mixed Bed Polisher
- Separate Anion/Cation beds
- Activated Carbon
- Softeners
- Emergency Service
Mobile Trailer Exchange Services – 100 GPM to 400 GPM
For Rent
Models Available
Demineralization, Filtration, Deoxygenation, Softening and Condensate Polishing
Manufacturer
Suez (Formerly GE Water)
Description
MobileFlow solutions are great for bridge solutions, system analysis and design through installation, maintenance, facility upgrades and emergency response. Each MobileFlow system contains six rubber lined ASME code steel tanks that allow operation in series or parallel.
EDI
For Rent
Models Available
E-Cell MK-2, E-Cell MK-3, 3X, MK and 3X Multi Stacks, E-Cell MK-3Mini, and PRO E-Cell
Manufacturer
Suez (Formerly GE Water)
Description
Provide ultrapure water for industrial applications including Power, Semiconductor, and General Industry.
Closed-Circuit Reverse Osmosis (CCRO)
Desalitech ReFlex High Recovery RO (up to 98%)
For RentFor Sale
Models Available
R2, R3, R5, R8, R10, R15, R20, R30 and R36
Manufacturer
Desalitech
Description
Desalitech offers 72000 to 1,295,000 Gallon per Day (GPD) Reverse Osmosis Units
DetailsRecovery Range: 75-98%
Permeate Rate Range gpm (m3/hr): 50 to 900 (11 to 255)
Desalitech ReFlex™ Reverse Osmosis systems are highly efficient water purification systems backed by Desalitech’s maximum recovery guarantee.
Featuring Desalitech’s patented Closed Circuit Desalination (CCD™) technology, ReFlex RO products are ideal for extracting purified water from industrial, brackish and wastewater sources. They use only standard off-the-shelf RO membranes and components, configured in a smart new way that gives the operator direct control of recovery rate, cross flow and flux.
Ranging in sizes from 72000 GPD (50 GPM) to 1,295,000 GPD (900 GPM), these high recovery RO units designed to operate in the 200-220 psig range. The series has 8" vessels with a maximum recovery of 98%. Operating temperature range is 36-113 degrees Fahrenheit. Minimum inlet pressure is 10 psig.
Flow Specifications:
Recovery Range: 75-98%
Permeate Rate Range gpm (m3/hr): 50 to 900 (11 to 255)
Motor:
Type: TEFC
Power: 20hp to 300hp
Operating Parameters:
Max Pressure: 450psig
Recovery: 75 - 98%
Nominal Rejection: 95-99.5%
Operating Temperature: 36-113°F
Inlet Pressure: 10 - 60 psig
Design Temperature: 77°F
Materials of Construction:
High-pressure piping: 316SS Sch.40
Low-pressure piping: PVC Sch.80
Frame: Epoxy Painted carbon steel
Clamps/races: Galvanized steel
Membranes elements: TFC
Features Include:
Chemical dosing systems
NSF-certified components
Clean-in-Place (CIP) and flushing systems
Programmable logic controller with remote monitoring and control functionality
Premium brackish water reverse osmosis membranes
Automatic response to feed variations
High recovery, low fouling/scaling and low energy consumption performance
Maximum recovery guaranteed
Desalitech ReFlex Max High Recovery RO (up to 98%)
For RentFor Sale
Models Available
ReFlex Max
Manufacturer
Desalitech
Description
ReFlex Max systems are ideal for brine concentration and seawater desalination.
DetailsAdjustable recovery – 35 to 98%.
Desalitech ReFlex™ Max Reverse Osmosis systems are highly efficient water purification systems ideal for brine concentration and seawater desalination. ReFlex Max RO is backed by Desalitech’s maximum recovery guarantee.
Featuring Desalitech’s patented Closed Circuit Reverse Osmosis (CCRO™) technology, ReFlex Max RO products extract purified water from industrial, brackish, seawater and wastewater sources. They use only standard off-the-shelf RO membranes and components configured in a smart new way that gives the operator direct control of recovery rate, cross flow and flux.
Flexible operation and resistance to scaling and fouling greatly improve the reliability of ReFlex Max RO systems. Operators can easily and automatically cope with variations in feed water and operational requirements, optimize process performance and minimize costs on a day-to-day basis. In the future, this flexibility can be used to maximize the performance of improved membranes or water pretreatments. By choosing a ReFlex solution now, countless future concerns and compromises can be avoided.
Standard Features
• Maximum Recovery - Guaranteed.
• Patented high recovery, low fouling/scaling,low energy consumption performance.
• Adjustable recovery – up to 98%.
• Automatic response to feed variations.
• Premium seawater RO membranes.
• Programmable logic controller with remotemonitoring and control functionality.
• Chemical dosing systems.
• NSF-certified components.
Optional Features
• Ultra-filtration or multi-media filtration.
• Mixed-bed permeate polishing.
• Transfer pumps, storage tanks.
• Clean-in-Place (CIP) and flushing systems.
Operating Parameters
• Adjustable Recovery: 40-98%
• Rejection: 95.0-99.5%
• Adjustable Flux: 6-25 gfd (10-42 lmh)
• Feed TDS: 5,000 - 70,000 mg/L
• Temperature: 36-113F (2-45C)
• Max Pressure: 1,200 psi (83 bar)
• Inlet Pressure: 10-60 psi (0.8-4.0 bar)
Materials of Construction
• High-Pressure Piping - SS / Duplex / SD
• Low-Pressure Piping - PVC Sch.80
• Frame - Epoxy Painted Carbon Steel
• Enclosure - Nema 4
• Clamps/Races - Galvanized steel
• Membrane Elements - TFC
Membrane Options
• 440 ft2 (std), 400 ft2 or 380 ft2
• 28 mil feed spacer (std) or 34 mil
• Low energy or high rejection
• Housings FRP, SS / Duplex / SD ports
Micro-Filtration (MF)
Micro-Filtration (MF)
For Sale
Models Available
Suez (Formerly GE Water), ZeeWeed, Pentair
Manufacturer
Suez (Formerly GE Water), Trisep, Pentair
Description
H2O Engineering partners with strategic leaders in the filtration industry to supply the highest efficiency, lowest operating cost, smallest footprint and the most ideal product for your application.
GRUNDFOS Chemical Dosing Pumps
For Sale
Models Available
DDA/DDC/DDE
Manufacturer
GRUNDFOS
Description
The SMART Digital DDA, DDC and DDE models with powerful variable-speed stepper motors bring state-of-the art technology to perfection.
DetailsThe included click-stop mounting plate is an example of the unique flexibility offered, with only a few variants. Easy handling and perfect overview and control ensure simple installation, commissioning and operation. The pump monitors the dosing process of liquids when the FlowControl function is activated, for advanced process reliability with accuracy of 1% of setpoint
DDA Models
• High-end solution for complex and demanding applications
• Flow and pressure up to 8 gph and up to 232 psi
• Auto-deaeration during pump standby
• Flexible Fieldbus control
• Turn-down ratio 3000:1 with constant 100% stroke length
DDC Models
• Optimal price-performance ratio
• Flow and pressure up to 4 gph and up to 145 psi
• Two SlowMode functions (25% and 50%), calibration mode,
service display
• External stop, dual-level tank control, 2 relay outputs
DDE Models
• Digital Dosing™ even for the low budget segment
• Flow and pressure from 0.0015 to 4 gph and up to 145 psi; two
models cover entire range
• Control options: manual control 0.1-100 %, pulse in % of stroke
volume
• External stop, empty tank control
Ultra-Filtration (UF)
GRUNDFOS Chemical Dosing Pumps
For Sale
Models Available
DDA/DDC/DDE
Manufacturer
GRUNDFOS
Description
The SMART Digital DDA, DDC and DDE models with powerful variable-speed stepper motors bring state-of-the art technology to perfection.
DetailsThe included click-stop mounting plate is an example of the unique flexibility offered, with only a few variants. Easy handling and perfect overview and control ensure simple installation, commissioning and operation. The pump monitors the dosing process of liquids when the FlowControl function is activated, for advanced process reliability with accuracy of 1% of setpoint
DDA Models
• High-end solution for complex and demanding applications
• Flow and pressure up to 8 gph and up to 232 psi
• Auto-deaeration during pump standby
• Flexible Fieldbus control
• Turn-down ratio 3000:1 with constant 100% stroke length
DDC Models
• Optimal price-performance ratio
• Flow and pressure up to 4 gph and up to 145 psi
• Two SlowMode functions (25% and 50%), calibration mode,
service display
• External stop, dual-level tank control, 2 relay outputs
DDE Models
• Digital Dosing™ even for the low budget segment
• Flow and pressure from 0.0015 to 4 gph and up to 145 psi; two
models cover entire range
• Control options: manual control 0.1-100 %, pulse in % of stroke
volume
• External stop, empty tank control
Ultra-Filtration (UF)
For Sale
Models Available
Various models available.
Manufacturer
Suez (Formerly GE Water), Trisep, Pentair
Description
H2O Engineering partners with strategic leaders in the filtration industry to supply the highest efficiency, lowest operating cost, smallest footprint and the most ideal product for your application.
Nano-Filtration (NF)
GRUNDFOS Chemical Dosing Pumps
For Sale
Models Available
DDA/DDC/DDE
Manufacturer
GRUNDFOS
Description
The SMART Digital DDA, DDC and DDE models with powerful variable-speed stepper motors bring state-of-the art technology to perfection.
DetailsThe included click-stop mounting plate is an example of the unique flexibility offered, with only a few variants. Easy handling and perfect overview and control ensure simple installation, commissioning and operation. The pump monitors the dosing process of liquids when the FlowControl function is activated, for advanced process reliability with accuracy of 1% of setpoint
DDA Models
• High-end solution for complex and demanding applications
• Flow and pressure up to 8 gph and up to 232 psi
• Auto-deaeration during pump standby
• Flexible Fieldbus control
• Turn-down ratio 3000:1 with constant 100% stroke length
DDC Models
• Optimal price-performance ratio
• Flow and pressure up to 4 gph and up to 145 psi
• Two SlowMode functions (25% and 50%), calibration mode,
service display
• External stop, dual-level tank control, 2 relay outputs
DDE Models
• Digital Dosing™ even for the low budget segment
• Flow and pressure from 0.0015 to 4 gph and up to 145 psi; two
models cover entire range
• Control options: manual control 0.1-100 %, pulse in % of stroke
volume
• External stop, empty tank control
Nano-Filtration (NF)
For Sale
Models Available
Various models available.
Manufacturer
Suez (Formerly GE Water), Trisep, Pentair
Description
H2O Engineering partners with strategic leaders in the filtration industry to supply the highest efficiency, lowest operating cost, smallest footprint and the most ideal product for your application.
Air Pumps, Compressors, & Blowers
GRUNDFOS Chemical Dosing Pumps
For Sale
Models Available
DDA/DDC/DDE
Manufacturer
GRUNDFOS
Description
The SMART Digital DDA, DDC and DDE models with powerful variable-speed stepper motors bring state-of-the art technology to perfection.
DetailsThe included click-stop mounting plate is an example of the unique flexibility offered, with only a few variants. Easy handling and perfect overview and control ensure simple installation, commissioning and operation. The pump monitors the dosing process of liquids when the FlowControl function is activated, for advanced process reliability with accuracy of 1% of setpoint
DDA Models
• High-end solution for complex and demanding applications
• Flow and pressure up to 8 gph and up to 232 psi
• Auto-deaeration during pump standby
• Flexible Fieldbus control
• Turn-down ratio 3000:1 with constant 100% stroke length
DDC Models
• Optimal price-performance ratio
• Flow and pressure up to 4 gph and up to 145 psi
• Two SlowMode functions (25% and 50%), calibration mode,
service display
• External stop, dual-level tank control, 2 relay outputs
DDE Models
• Digital Dosing™ even for the low budget segment
• Flow and pressure from 0.0015 to 4 gph and up to 145 psi; two
models cover entire range
• Control options: manual control 0.1-100 %, pulse in % of stroke
volume
• External stop, empty tank control
TonkaFlo Pumps
For Sale
Models Available
Various model available.
Manufacturer
TonkaFlo
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate pump selection.
Grundfos Pumps
For Sale
Models Available
Various models available.
Manufacturer
Grundfos
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate pump selection.
Goulds Pumps
For Sale
Models Available
Various models available.
Manufacturer
Goulds
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate pump selection.
ProMinent Metering Pumps
For Sale
Models Available
Various model available.
Manufacturer
ProMinent
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate pump selection.
Kaeser Blowers
For Sale
Models Available
Various models available.
Manufacturer
Kaeser
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate blower selection.
DetailsKaeser blowers are utilized when high air flow is needed. Blowers range in size up to 5650 cfm and 15 psig.
Kaeser Compressors
For Sale
Models Available
Various models available.
Manufacturer
Kaeser
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate compressor selection.
DetailsKaeser compressors are utilized in our larger ozone remediation systems to ensure reliable ozone delivery and maximize up time.
UV
Aquafine SL Series UV System - 10 to 20 GPM
For Sale
Models Available
SL Series: SL 1 and MP 2 SL
Manufacturer
Aquafine
Description
Aquafine’s SL Series provide a compact design and economical ultraviolet (UV) water treatment for lowflow disinfection applications, such as laboratory and medical facility water, pharmaceutical make-up processes, final electronic component rinsing and recirculation loops, to name a few.
DetailsThe Aquafine SL Series consists of a 316L stainless steel treatment chamber and a 304L stainless steel control panel in one integral unit. All models are compact in size, maximizing installation flexibility and preserving floorspace. Aquafine’s singleended lamps allow for quick change-outs without tools.
Options
• UV & temperature monitoring system (select models)
• UV & temperature detector,* hot water sanitizable
• UV intensity 4-20mA*
• Lamp Out Alert (LOA)
• Stainless steel compression nuts
• Sample ports
• Sanitary fittings
• Validated lamps
• Additional voltages available
Note: These options are only available on SL models.
Safe & Effective
UV disinfection is a chemical-free process that adds nothing to the water except UV light. It provides
rapid, effective inactivation of microorganisms through a physical process. When bacteria, viruses
and protozoa are exposed to the germicidal wavelengths of UV light, they are rendered incapable
of reproducing and infecting. No carcinogenic disinfection by-products are created, and no transportation, storage or handling of toxic or corrosive chemicals is necessary.
Aquafine HX Series UV System - 40 to 1400 GPM
For Sale
Models Available
Optima HX Series
Manufacturer
Aquafine
Description
Efficient and cost effective, the Optima HXTM provides proven performance and technology for the Aquaculture, Food & Beverage, Life Sciences and Microelectronics industries.
DetailsUtilized for ozone destruction and disinfection, the Optima HX is not only cost effective, but proves to be a reliable, innovative and environmentally smart alternative.
UV Technology
Aquafine ultraviolet (UV) systems are engineered to focus the power of UV light, utilizing specially designed Aquafine Colorguard UV technology is used throughout the world, in a wide array of
applications, as a environmentally responsible way to disinfect and safeguard water against harmful microorganisms.
Safe & Effective
UV disinfection is a chemical-free process that adds nothing to the water except UV light. It provides rapid, effective inactivation of microorganisms through a physical process. When bacteria, viruses and protozoa are exposed to the germicidal wavelengths of UV light, they are rendered incapable of
reproducing and infecting. No carcinogenic disinfection by-products are created, and no transportation, storage or handling of toxic or corrosive chemicals is necessary.
Neotech Aqua Solutions - 30 to 330 GPM
For Sale
Models Available
D222, D228, D238, D322, D328, D338, D428 and D438
Manufacturer
Neotech Aqua Solutions
Description
The NeoTech Aqua Disinfection Series is specially designed to disinfect water and is an essential component in advanced oxidation processes.
These high-efficiency UV systems utilize NeoTech Aqua’s patented ReFleXTM chamber technology, reflecting over 99% of the 254nm UV generated. They are the highest efficiency, smallest footprint, and lowest operating cost UV systems in the water treatment industry.
With only one or two lamps, the NeoTech Aqua Disinfection Series provides users the most convenient and lowest cost service schedule of any low pressure or medium pressure UV systems today.
Maximum UV Penetration
The NeoTech Disinfection Series provides users an unparalleled level of engineering sophistication by maximizing UV distribution in a patented 99% reflective chamber. This unique technical advantage also reduces the number of lamps and power requirements by up to 90% compared to standard UV systems. Minimal
Maintenance and Service
The service and maintenance requirements for the NeoTech Disinfection Series are limited to three basic requirements:
- Lamp Replacement: No Tools Required
- UV Monitor: May be changed with a single screwdriver while the system is operating
- Cleaning: May be cleaned as needed in a CIP loop or manually brushed.
Unparalelled Efficiency
The NeoTech Disinfection Series boasts the smallest footprint in its class. With as few as one-tenth
as many bulbs compared to standard UV systems, it has the lowest operating cost and maintenance
schedule in the field.
Product Benefits
- 75% smaller footprint compared to standard UV systems
- May be mounted vertically or horizontally
- Up to four units may be controlled with a single micro-control box
- Built for 120V or 230V single phase power providing maximum flexibility
- No Flow, No ProblemTM — guaranteed 60 minutes
- Water contact finish — Ra-15
- Controller — Remote
- Alarms, Remote Control, 4-20 mA output
- Real time dosimetry, 100% dosage assurance — with constant flow
- UV monitor is NIST traceable
- Sanitization in place — hot water or steam
- No-tool lamp change• NSF Standard 50 certified
- Warranty one year parts and labor
Neptune Benson UV System
For Sale
Models Available
ECF
Manufacturer
Neptune Benson
Description
The Neptune Benson ETS ECF range of products offers medium pressure, multiple lamp (typically 2 or 4) advanced disinfection system that encompasses a vast dose range for a variety of flows in numerous applications. The compact system has been designed for the simplest installation into any pipe work system.
DetailsTypical Applications Include:
- Recreational: waterparks, indoor pools, outdoor pools, splash pads, therapy pools, spa, competitive pools, fountains
- Industrial: dairy, food & beverage, brewery/distillery, process water, marine & ocean liner, aquaculture, cooling tower, pharmaceutical
Quality Materials
- Chambers are constructed from material that is suited to withstand the powerful effects of the UV disinfection process
- Will not produce harmful carcinogenic byproducts
Flexible Design
- Can be installed in a vertical or horizontal orientation
- Easily incorporated into new installations or retrofitted solutions
- Flanges are standard ANSI 150 RF
- Flexible connection range of 4" to 12”, metric available
Energy Efficient
- Variable power
- Continuously meets dosing requirements
- Improve lamp life
- Reduce energy costs
Low Voltage, Automatic Wiper
- Keeps optical path free from fouling
- Reduction in maintenance
- Extends lamp life
Basic Control and Full Plant Integration
- Touch screen display
- Temperature probe
- UV monitor
- Data logging capability with remote access
Membrane Bioreactor (MBR)
Membrane Bioreactor
For Sale
Models Available
E-10K, E-20K, E-30K, E-40K, E-50K, E-75K
Manufacturer
Suez (Formerly GE Water) / Other
Description
H2O Engineering partners with strategic leaders in the bioreactor industry to supply the highest efficiency, lowest operating cost, smallest footprint and the most ideal product for your application.
Benefits
- E-Series MBR treats your waste in a small footprint, typically 30% less than conventional wastewater treatment.
- The effluent is virtually free of bacteria and suspended solids, making it ideal for reuse for flushing, irrigation, firewater and cooling tower makeup water.
- Short delivery timeline from order to a fully operating system.
- Prefabricated, skid-mounted equipment makes installation quick and easy.
- Simple operation with few units of operation required.
- Effluent and sludge are virtually free of odour.
Automation, Controls and Telemetry
Automation, Controls and Telemetry
For Sale
Models Available
PLC Control Systems, Remote Telemetry & SCADA Systems, Electrical Design, and Control Panel Fabrication
Manufacturer
H2O Engineering Inc.
Description
H2O Engineering Inc is a UL 508A facility with Electrical Professional Engineers on staff.
H2O Engineering, Inc. has built a reputation over the past decade for designing and building quality products with robust control systems. It is our philosophy that a simple and intuitive, yet powerful interface between the equipment operators and the control system is critical to the success of your project or facility. We work closely with each client to design a custom interface that meets the needs of each unique application. With a track record of proven successful execution, H2O Engineering is capable to assist you in attaining your goals regarding PLC, HMI, and SCADA system design.
Ozone Remediation Products
Cabinet Ozone Sparge Unit
Cabinet Ozone Sparge Unit
For RentFor Sale
Models Available
OSUXX-52 and OSUXX-104
Manufacturer
H2O Engineering Inc.
Description
XX in model number denotes the amount of sparge valves. Custom units available upon request.
DetailsFeaturing Intelo-zone® Control Technology, H2O Engineering’s ozone sparge systems deliver the highest concentration of ozone gas directly to the contaminated subsurface. Ozone is released in controlled time duration sequences via in-situ oxidation points. This feature can be programmed and recorded by the logic controller.
Standard Features
- Intelo-zone® Control Technology
- FREE H2O Engineering Telemetry Package for remote monitoring and controls
- Full one-year warranty includes materials and workmanship
- 10, 20, 30 or 40 port manifolds available (XX in model number denotes the amount of sparge valves.)
- Programmable Logic Controller (PLC) with Human Machine Interface (HMI)
- User selection for ozone, ozone/air, oxygen, oxygen/air or air per sparge port
- Delivery flow and pressure displayed and logged via PLC, viewable from HMI
- Automated maintenance notifications
Ozone Generator Output and Supply
- 2.74 to 5.47 lbs/day, up to 6% concentration by weight
- PSA oxygen concentrator delivers 90% purity
- Ozone delivery pump features all ozone-resistant components
- Maximum ozone sparge pressure of 50 PSI
- Maximum air/breakthrough sparge pressure of 90 PSI
- Automatic regression from ozone to air/breakthrough mode upon high pressure detection
Intelo-zone® Control Technology
- Independent time duration control for each sparge port (programmable from 1 to 120 minutes)
- Independent time accumulators for tracking ozone vs. oxygen vs. air / breakthrough time per valve
- User configurable valve sparge sequence ordering
- Variable ozone output can be individually configured for each valve
- Lag time between sparge cycles (programmable from 1 to 480 minutes)
- Suspend mode for planned nonoperational periods
- Online monitoring options available PH, ORP, DO, DO3, etc.
Distinctive built-in safety features:
- Ambient ozone alarm/shutdown sensor
- High pressure alarm/shutdown
- Built-in thermal protection, high/low temperature alarms
- Sensor failure alarm
- Remote shutdown interface signal
- Remote ozone sensor connections
Service contracts and start-up assistance available
Custom systems available for unique project needs
Container Ozone Sparge Unit
Container Ozone Sparge Unit
For RentFor Sale
Models Available
COSUXX-52, COSUXX-104, COSUXX-208, COSUXX-520 and COSUXX-840
Manufacturer
H2O Engineering Inc.
Description
XX in model number denotes the amount of sparge valves. Custom units available upon request.
DetailsFeaturing Intelo-zone® Control Technology, H2O Engineering’s ozone sparge systems deliver the highest concentration of ozone gas directly to the contaminated subsurface. Ozone is released in controlled time duration sequences via in-situ oxidation points. This feature can be programmed and recorded by the logic controller.
Standard Features
- Intelo-zone® Control Technology
- FREE H2O Engineering Telemetry Package for remote monitoring and controls
- Full one-year warranty includes materials and workmanship
- 10, 20, 30 or 40 port manifolds available (XX in model number denotes the amount of sparge valves.)
- Programmable Logic Controller (PLC) with Human Machine Interface (HMI)
- User selection for ozone, ozone/air, oxygen, oxygen/air or air per sparge port
- Delivery flow and pressure displayed and logged via PLC, viewable from HMI
- Automated maintenance notifications
Ozone Generator Output and Supply
- 2.74 to 43.8 lbs/day, up to 6% concentration by weight
- PSA oxygen concentrator delivers 90% purity
- Ozone delivery pump features all ozone-resistant components
- Maximum ozone sparge pressure of 50 PSI
- Maximum air/breakthrough sparge pressure of 90 PSI
- Automatic regression from ozone to air/breakthrough mode upon high pressure detection
Intelo-zone® Control Technology
- Independent time duration control for each sparge port (programmable from 1 to 120 minutes)
- Independent time accumulators for tracking ozone vs. oxygen vs. air / breakthrough time per valve
- User configurable valve sparge sequence ordering
- Variable ozone output can be individually configured for each valve
- Lag time between sparge cycles (programmable from 1 to 480 minutes)
- Suspend mode for planned nonoperational periods
- Online monitoring options available PH, ORP, DO, DO3, etc.
Distinctive built-in safety features:
- Ambient ozone alarm/shutdown sensor
- High pressure alarm/shutdown
- Built-in thermal protection, high/low temperature alarms
- Sensor failure alarm
- Remote shutdown interface signal
- Remote ozone sensor connections
Service contracts and start-up assistance available
Custom systems available for unique project needs
Mobile Ozone Sparge Unit
Mobile Ozone Injection System
For RentFor Sale
Models Available
MOSUXX-52, MOSUXX-104, MOSUXX-208, MOSUXX-520 and MOSUXX-840
Manufacturer
H2O Engineering Inc.
Description
XX in model number denotes the amount of sparge valves. Custom units available upon request.
DetailsFeaturing Intelo-zone® Control Technology, H2O Engineering’s ozone sparge systems deliver the highest concentration of ozone gas directly to the contaminated subsurface. Ozone is released in controlled time duration sequences via in-situ oxidation points. This feature can be programmed and recorded by the logic controller.
Standard Features
- Intelo-zone® Control Technology
- FREE H2O Engineering Telemetry Package for remote monitoring and controls
- Full one-year warranty includes materials and workmanship
- 10, 20, 30 or 40 port manifolds available (XX in model number denotes the amount of sparge valves.)
- Programmable Logic Controller (PLC) with Human Machine Interface (HMI)
- User selection for ozone, ozone/air, oxygen, oxygen/air or air per sparge port
- Delivery flow and pressure displayed and logged via PLC, viewable from HMI
- Automated maintenance notifications
Ozone Generator Output and Supply
- 2.74 to 43.8 lbs/day, up to 6% concentration by weight
- PSA oxygen concentrator delivers 90% purity
- Ozone delivery pump features all ozone-resistant components
- Maximum ozone sparge pressure of 50 PSI
- Maximum air/breakthrough sparge pressure of 90 PSI
- Automatic regression from ozone to air/breakthrough mode upon high pressure detection
Intelo-zone® Control Technology
- Independent time duration control for each sparge port (programmable from 1 to 120 minutes)
- Independent time accumulators for tracking ozone vs. oxygen vs. air / breakthrough time per valve
- User configurable valve sparge sequence ordering
- Variable ozone output can be individually configured for each valve
- Lag time between sparge cycles (programmable from 1 to 480 minutes)
- Suspend mode for planned nonoperational periods
- Online monitoring options available PH, ORP, DO, DO3, etc.
Distinctive built-in safety features:
- Ambient ozone alarm/shutdown sensor
- High pressure alarm/shutdown
- Built-in thermal protection, high/low temperature alarms
- Sensor failure alarm
- Remote shutdown interface signal
- Remote ozone sensor connections
Service contracts and start-up assistance available
Custom systems available for unique project needs
Large Scale Ozone System
Large Scale Ozone System
For Sale
Manufacturer
H2O Engineering Inc.
Description
50+ pounds/day ozone output. Contained or pad mounted.
DetailsFeaturing Intelo-zone® Control Technology, H2O Engineering’s ozone sparge systems deliver the highest concentration of ozone gas directly to the contaminated subsurface. Ozone is released in controlled time duration sequences via in-situ oxidation points. This feature can be programmed and recorded by the logic controller.
Standard Features
- Intelo-zone® Control Technology
- FREE H2O Engineering Telemetry Package for remote monitoring and controls
- Full one-year warranty includes materials and workmanship
- Sparge manifolds designed per application
- Programmable Logic Controller (PLC) with Human Machine Interface (HMI)
- User selection for ozone, ozone/air, oxygen, oxygen/air or air per sparge port
- Delivery flow and pressure displayed and logged via PLC, viewable from HMI
- Automated maintenance notifications
Ozone Generator Output and Supply
- 50+ lbs/day ozone output
- Ozone delivery pump features all ozone-resistant components
- Automatic regression from ozone to air/breakthrough mode upon high pressure detection
Intelo-zone® Control Technology
- Independent time duration control for each sparge port (programmable from 1 to 120 minutes)
- Independent time accumulators for tracking ozone vs. oxygen vs. air / breakthrough time per valve
- User configurable valve sparge sequence ordering
- Variable ozone output can be individually configured for each valve
- Lag time between sparge cycles (programmable from 1 to 480 minutes)
- Suspend mode for planned nonoperational periods
- Online monitoring options available PH, ORP, DO, DO3, etc.
Distinctive built-in safety features:
- Ambient ozone alarm/shutdown sensor
- High pressure alarm/shutdown
- Built-in thermal protection, high/low temperature alarms
- Sensor failure alarm
- Remote shutdown interface signal
- Remote ozone sensor connections
System designed and built to specifications of client
Service contracts and start-up assistance available
Sparge Well Materials
PFA Teflon® Tubing
For Sale
Models Available
PFA Teflon® Tubing
Description
Ozone Delivery Tubing: 1/2” OD x 3/8” ID, up to 1000 Ft. Continuous Roll
NOTE: Retrofit materials for monitoring wells are available.
Well Head Connections
For Sale
Models Available
WHC10, WHC20 and WHC40
Manufacturer
H2O Engineering Inc.
Description
1”, 2" and 4" Pipe and 1/2”OD Compression Fitting for Tubing
Well Head Connections (WHC) are made from the highest quality materials available to maximize success of in-situ remediation treatments. The WHC features a Kynar® compression fitting, and a type 316 stainless steel inlet tee in a sealed Schedule 80 PVC body. A ¼” FPT access port is included to accommodate a pressure gauge for accurate pressure readings where they count the most. Well Head Connections are available for ½”or 1” H2O Engineering riser pipe sections. Any existing on-site 2” or 4“ monitoring well casing can be easily modified using our 2” or 4“ WHC fitting to accommodate our ozone sparge technology.
NOTE: Retrofit materials for monitoring wells are available.
Riser Pipe
For Sale
Models Available
RP100 (10 feet) and RP100-5 (5 feet)
Manufacturer
H2O Engineering Inc.
Description
1.0” ID, Schedule 80 with Viton® O-Ring, and 1.0” x 8-TPI ASTM F-480
Riser Pipe (RP) is an integral component of our complete In-Situ Oxidation Point (IOP) system. Each Riser Pipe section is sealed with an ozone-resistant Viton® o-ring to insure no leaks occur while under pressure. Schedule 80 PVC is used for the durability and ozone resistance required for harsh field conditions that often exist for in-situ remediation. Each 10-foot section is available in 1” ID.
NOTE: Retrofit materials for monitoring wells are available.
In-Situ Oxidation Points
For Sale
Models Available
IOP100-12-P
Manufacturer
H2O Engineering Inc.
Description
1” OD x 12”L, Viton® O-Ring, and 1.0” x 8-TPI ASTM F-480 Male Flush Thread
Our In-Situ Oxidation Points (IOP) were designed by our engineering staff exclusively for use with our ozone sparge units. Each has a stainless steel body with 3/8" x 1-1/2" outlets and 50 mesh internal stainless steel screen. Made from ozone-resistant Stainless Steel, they are rigid by design and include a Viton® o-ring seal. These oxidation points provide maximum ozone transfer to the contaminated water table and soil. Efficient mass transfer means remediation takes place quickly and completely.
NOTE: Retrofit materials for monitoring wells are available.
Service, Operations and Maintenance
Installation, Service and O&M
Description
H2O Engineering, Inc. does not only pride itself on the equipment that it manufactures, but equally on the services that we provide in support of our products and our clients’ objectives. From assisting in preliminary development of project strategies and custom design concepts, to equipment O&M and data collection, and all the way through to project completion, we provide invaluable resources that promote goal achievement.
H2O Engineering understands that even with our standard products, the equipment sale itself is merely the beginning of our project relationship with clients. We nurture our client associations in an effort to gain an ongoing mutual trust, which facilitates efficient communication, promotes design innovation, and ensures site performance.
In addition to our commitment to our clients, H2O Engineering is also dedicated to Health and Safety. Our Service and Sales technicians are all extensively trained in CPR/First Aid and 40hr HAZWOPER. These efforts enable us to provide industry leading, hands on support, regardless of varying site environments. It also qualifies our technicians to adhere to specific, often stringent, site requirements. H2O Engineering, Inc. is a California licensed General Contractor # 790167 and has license Electrical Professional Engineers on staff.
Automation, Controls and Telemetry
Automation, Controls and Telemetry
For Sale
Models Available
PLC Control Systems, Remote Telemetry & SCADA Systems, Electrical Design, and Control Panel Fabrication
Manufacturer
H2O Engineering Inc.
Description
H2O Engineering Inc is a UL 508A facility with Electrical Professional Engineers on staff.
H2O Engineering, Inc. has built a reputation over the past decade for designing and building quality products with robust control systems. It is our philosophy that a simple and intuitive, yet powerful interface between the equipment operators and the control system is critical to the success of your project or facility. We work closely with each client to design a custom interface that meets the needs of each unique application. With a track record of proven successful execution, H2O Engineering is capable to assist you in attaining your goals regarding PLC, HMI, and SCADA system design.
Air Pumps, Compressors, & Blowers
Kaeser Blowers
For Sale
Models Available
Various models available.
Manufacturer
Kaeser
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate blower selection.
DetailsKaeser blowers are utilized when high air flow is needed. Blowers range in size up to 5650 cfm and 15 psig.
Kaeser Compressors
For Sale
Models Available
Various models available.
Manufacturer
Kaeser
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate compressor selection.
DetailsKaeser compressors are utilized in our larger ozone remediation systems to ensure reliable ozone delivery and maximize up time.
GSE Compressors
For Sale
Models Available
Various model available.
Manufacturer
GSE
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate pump selection.
DetailsGSE compressors are utilized in our smaller ozone remediation systems to ensure reliable ozone delivery and maximize up time.
LMI Pumps
For Sale
Models Available
Various model available.
Manufacturer
LMI
Description
Consult with H2O Engineering Water Treatment Technologist for appropriate pump selection.
DetailsLMI pumps are utilized in our ozone remediation systems when environmental consultants choose to inject a chemical substrate as an additional remediation strategy.
